Teltonika FMB010 First Start-Up Quick Start Guide

https://wiki.teltonika-gps.com/view/FMB010_First_Start
FMB010 First Start
Main Page > Fast & Easy Trackers > FMB010 > FMB010 First Start
An easy Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth
connectivity
Contents
1 How to insert Micro-SIM card and connect battery
2 How to insert SD card into FMB010
3 OBD II pinout
3.1 PC Connection (Windows)
3.2 How to install USB drivers (Windows)
3.3 Configuration (Windows)
3.4 Quick SMS configuration
4 Quick start guide
5 Safety information
5.1 Precautions
How to insert Micro-SIM card and connect battery
Gently remove FMB010 cover using plastic pry tool from both sides.1.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to2.
enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing
forward to slot.
Connect battery as shown to device. Position the battery in place where it does not obstruct3.
other components.
Attach device cover back.4.
Device is ready to be connected.
Micro-SIM card insertion/removal must be performed when device is powered off – external
voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or
device will not detect it.

Teltonika FMB010 Specifications

General

GNSS	GPS, GLONASS, GALILEO, BEIDOU
Tracking sensitivity	-165 dBm
Position Accuracy	2.5 m
Hot start	1 s
2G bands	850/900/1800/1900 MHz
SMS	Yes
Accelerometer	Yes
GPS Channels	72
Assisted GPS	Yes
Cellular Connectivity	2G
Wi-Fi	No
Battery Backup	Yes
IP Rating	IP54
Data transfer	TCP/UDP
Power supply range	9 - 30 V DC
Internal Battery	Yes
Operating temperature	-40 °C to +85 °C
Scenario	Vehicle tracking, personal tracking, asset tracking
GPS Chipset	u-blox
Antenna	Internal
SIM	Mini-SIM
Inputs/Outputs	Digital inputs, analog input
Certifications	CE, FCC