Teltonika FMB130 First Start-Up Quick Start Guide

https://wiki.teltonika-gps.com/view/FMB130_First_Start
FMB130 First Start
Main Page > Advanced Trackers > FMB130 > FMB130 First Start
GNSS/GSM/Bluetooth tracker with internal GNSS/GSM antennas and internal battery
Contents
1 How to insert Micro-SIM card
2 Battery placement after complete device disassembling
3 2x6 socket pinout
3.1 PC Connection (Windows)
3.2 How to install USB drivers (Windows)
3.3 Configuration (Windows)
3.4 Quick SMS configuration
4 Mounting recommendations
4.1 Installation photos
5 Safety information
5.1 Precautions
How to insert Micro-SIM card
Gently remove FMB130 cover using plastic pry tool from both sides.1.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to2.
enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing
forward to slot.
Attach device cover back.3.
Device is ready to be connected.4.
Micro-SIM card insertion/removal must be performed when device is powered off –
external voltage and internal battery disconnected. Otherwise Micro-SIM card might be
damaged or device will not detect it.
Battery placement after complete device disassembling

Teltonika FMB130 Specifications

General

Purpose	Car
Product color	Black
Electronic compass	No
Battery life (max)	- h

Weight and Dimensions

Weight	55 g