Teltonika FMB920 First Start-Up Quick Start Guide

https://wiki.teltonika-gps.com/view/FMB920_First_Start
FMB920 First Start
Main Page > Basic Trackers > FMB920 > FMB920 First Start
Small and smart tracker with Bluetooth and internal backup battery
Contents
1 How to insert Micro-SIM card
2 Pinout
2.1 PC Connection (Windows)
2.2 How to install USB drivers (Windows)
2.3 Configuration (Windows)
2.4 Quick SMS configuration
3 Quick start guide
4 Mounting recommendations
5 Installation photos
6 Safety information
6.1 Precautions
How to insert Micro-SIM card
Gently remove FMB920 cover using plastic pry tool from both sides.1.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to2.
enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing
forward to slot.
Connect the battery as shown on device. Position the battery in place where it does not3.
obstruct other components.
Attach device cover back. Device is ready to be connected.4.
Micro-SIM card insertion/removal must be performed when device is powered off –
external voltage and internal battery disconnected. Otherwise Micro-SIM card might be
damaged or device will not detect it.

Teltonika FMB920 Specifications

General

Purpose	Car
Product color	Black
SIM card slot	Yes
Channels quantity	33 channels
Electronic compass	-
GSM bands supported	850, 900, 1800, 1900 MHz
International Protection (IP) code	IP54
USB connector type	Micro-USB B
Memory card slot(s)	No
Built-in memory capacity	0.128 GB
Battery capacity	170 mAh
Battery life (max)	- h
Operating temperature (T-T)	-40 - 85 °C

Weight and Dimensions

Depth	79 mm
Width	43 mm
Height	12 mm
Weight	54 g