https://wiki.teltonika-gps.com/view/FMC125_First_Start
FMC125 First Start
Main Page > Advanced Trackers > FMC125 > FMC125 First Start
Advanced LTE terminal with GNSS and LTE/3G/GSM connectivity, RS485/RS232 interfaces
and backup battery.
Contents
1 How to insert SIM card and connect the battery
2 Battery placement after complete device disassembling
3 2x6 socket pinout
3.1 PC Connection (Windows)
3.2 How to install USB drivers (Windows)
3.3 Configuration (Windows)
3.4 Quick SMS configuration
4 Mounting recommendations
5 Safety information
5.1 Precautions
How to insert SIM card and connect the battery
Gently remove FMC125 cover using plastic pry tool from both sides.1.
Note: To properly open a new case please watch this video.
Insert SIM card as shown with PIN request disabled or read Security info how to enter it2.
later in Teltonika Configurator. Make sure that SIM card cut-off corner is pointing forward to
slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
Connect battery as shown to device. Position the battery in place where it does not obstruct3.
other components.
After configuration, see “PC Connection (Windows)”, attach device cover back.4.
SIM card insertion/removal must be performed when device is powered off – external
voltage and internal battery disconnected. Otherwise SIM card might be damaged or
device will not detect it.
To Next Page
Need help?
General
Weight and Dimensions
