https://wiki.teltonika-gps.com/view/FMM640_First_Start
FMM640 First Start
Main Page > EOL Products > FMM640 > FMM640 First Start
Leading LTE CAT M1/GNSS/BLE Terminal for advanced applications
Contents
1 How to insert SIM card and connect the battery
2 How to insert microSD card into FMM640
3 2x10 socket pinout
3.1 PC Connection (Windows)
3.2 How to install USB drivers (Windows)
3.3 Configuration (Windows)
3.4 Quick SMS configuration
4 Mounting recommendations
5 Safety information
5.1 Precautions
How to insert SIM card and connect the battery
Unscrew 4 screws counterclockwise that are located on the bottom of the device.1.
Remove the cover.2.
Insert SIM card as shown with PIN request disabled or read Security info how to enter it3.
later in Teltonika Configurator. Make sure that SIM card cut-off corner is pointing outwards.
SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
Connect battery as shown to device.4.
After configuration, see “PC Connection (Windows)”, attach device cover back.5.
Screw in all screws. Device is ready to be mounted.6.
SIM card insertion/removal must be performed when device is powered off – external
voltage and internal battery disconnected. Otherwise SIM card might be damaged or device
will not detect it.
To Next Page
Need help?
General
