Teltonika TMT250 Quick Start Guide

HOW TO ASSEMBLE
THE WRISTBAND OF
TMT250
HOW TO ASSEMBLE THE WRISTBAND OF TMT250 V1.00
Allen key, size 2
(Not included in the
package)
TMT250 device
TMT250 tamper
detection device
STEP 1
Unscrew the bolts of
the lid with allen key:
STEP 3
Before inserting TMT250 into the tamper
detection device, ensure that the wristband
is securely placed in the back of the device.
STEP 2
Remove the lid of the device
by lowering rubber tie and
pulling the wristband.
PULL
PULL
STEP 4
Make sure that the wristband securely stays
in place. Then, insert TMT250 device all the
way in, so that contacts of TMT250 would
face outside of tamper detection device.
PULL
STEP 5
After inserting the device check if
the wristband has not slipped out
by pulling the wristband. Keep the
cover unclosed while pulling the
wristband softly. If it slips out,
repeat Step 3 and 4.
PREPARATION:

Teltonika TMT250 Specifications

General

Purpose	Personal
Sleep mode	Yes
Product color	Black
LED indicators	Status
Housing material	Plastic
Channels quantity	33 channels
Electronic compass	No
Protection features	Dust resistant
SIM card capability	Single SIM
International Protection (IP) code	IP67
USB version	2.0
Battery voltage	3.8 V
Battery capacity	800 mAh
Battery life (max)	8 h
Number of batteries supported	1
Built-in memory capacity	0.128 GB
Certification	CE/RED, EAC, Anatel, UKCA, RoHS, REACH
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-25 - 55 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	44 mm
Width	43 mm
Height	20 mm
Weight	40 g