Teltonika TMT250 Test Guide

TMT250 Sample Test Guide v1
About the document
This document is aimed at testing the TMT250 samples and launching device for the first time. Following the
steps below will help you to test TMT250 device.
After tests are successfully performed, please provide feedback to your Teltonika sales manager.
Figure 1. TMT250 samples example
1. Getting started with TMT250 device
What is required for testing?
 TMT250 device;
 Micro SIM card with available GPRS, SMS and call features (without PIN code);
 Personal Computer (Windows OS, not lower than Windows 7);
1.1. TMT250 preparation
1.1.1. Insert SIM card and connect the battery
 Use screwdriver to take off TMT250 cover.
 Open the TMT250 cover and insert Micro SIM card and connect the battery as shown in a Figure
2 and 3.
 Close the cover and screw in the bolts.
Figure 2. Opened TMT250 cover

Teltonika TMT250 Specifications

General

Purpose	Personal
Sleep mode	Yes
Product color	Black
LED indicators	Status
Housing material	Plastic
Channels quantity	33 channels
Electronic compass	No
Protection features	Dust resistant
SIM card capability	Single SIM
International Protection (IP) code	IP67
USB version	2.0
Battery voltage	3.8 V
Battery capacity	800 mAh
Battery life (max)	8 h
Number of batteries supported	1
Built-in memory capacity	0.128 GB
Certification	CE/RED, EAC, Anatel, UKCA, RoHS, REACH
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-25 - 55 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	44 mm
Width	43 mm
Height	20 mm
Weight	40 g