“Ding
Dong”
Don’t have one of these?
If your chime box is not either of the above options or you have an
intercom system, then it is incompatible with the Doorbell Camera.
Mechanical Chime
Digital Chime
Requires installation of Digital Doorbell Adapter. For
installation instructions, please refer to Step 9 or visit
telus.com/DoorbellCamera.
Check Your Chime
Didn’t Ring?
If the existing doorbell does not ring the indoor chime when the button
is pressed, there may be a power issue and an electrician should be
consulted before beginning the doorbell camera installation process.
Check Your Wi-Fi Speed at the Door
The Doorbell Camera requires a minimum of 2.5
Mbps upload speed to operate. In a browser on
your smartphone visit telus.com/speedtest to
determine the Internet speed.
Check Your Doorbell
21
Slimline Wi-Fi
Doorbell Camera
Installation
Guide
ADC-VDB105
Before You Start
You’ll need:
Drill
(Optional)
Existing Wired
Chime Box
Smartphone
or Tablet
Low Voltage Power
(8-30 VAC, 10 VA or 12 VDC)
2.5 Mbps Upload
Wi-Fi
Screwdriver Pencil
What’s in the box?
Doorbell Camera Wall Mounting
Bracket
Wall Screws
Masonry Drill BitWall Anchors
Digital Doorbell Adapter
Watch the installation video at
telus.com/DoorbellCamera or scan
the QR code.
To Next Page
Need help?
General
