TELUS ADC-VDB105 - Shut off Power to Doorbell; Remove Existing Doorbell; Test Doorbell; Mark Screw Holes

No Wires?
If the existing doorbell does not have wires then it is incompatible with
the Doorbell Camera.
Test Doorbell
2 Wires
TIP
Bend the doorbell
wires so they don’t
slip back into the wall.
You’ll need:
Screwdriver
Remove Existing DoorbellShut OFF Power to Doorbell
3 4
Mark Screw Holes
You’ll need:
Mounting Bracket Pencil
5
Stucco Brick Stone
Wood Vinyl Aluminum
Determine Your Siding
6
Go to Step
8
Go to Step
7