EasyManua.ls Logo

Temptek CF Series - Shut Down and Disconnect Sequence

Temptek CF Series
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CF Series Portable Chiller : Air & Water-Cooled : 5 - 40 Tons
Page: 36
TEMPTEK, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-6352 Fax: 317-881-1277
Email: service@Temptek.com
3.4 SHUT DOWN/DISCONNECT SEQUENCE
A. PRECAUTIONS/WARNINGS
1. The operator must follow all shut down procedures outlined in this manual. If the
operator fails to follow all procedures outlined in this manual, an unsafe condition
can develop resulting in damage to the unit or personal injury.
B. UNIT SHUT DOWN
1. To shut down the unit without disconnecting from the process:
a. Move the ON / OFF switch to the off position.
2. To shut down the unit and disconnect from the process:
a. Move the ON / OFF switch to the off position.
b. Disconnect all process lines.
WARNING: Relieve static pressure before disconnection process lines.
WARNING: Follow all shut down procedures outlined in this manual.

Table of Contents