Ten-Tec JUPITER - Page 11

Chapter 8 describes PEGASUS
EMULATION MODE of computer-
controlled operation at the operator’s
option,
UNPACKING
Examine your transceiver carefully for
signs of shipping damage. Should any
damage be apparent, notify the
delivering carrier immediately, stating
the full extent of the damage.
Retain all damaged cartons. Liability for
shipping damage rests with the carrier.
We recommended you keep the shipping
carton and fillers in the event that
storage, moving or re-shipment becomes
necessary.
The following hardware and accessories
come standard with your JUPITER.
Make sure that you have not overlooked
anything.
#74269 | User's manual
#74020 | Warranty Card
#46176 | 5-pin DIN male to 4
phono plugs
#86095 | DC power cord
#41020
#35165
Female terminal pins
2 pin power connector
shell
#35017 1⁄4 in. stereo plug
#35003
#35057
Male phono plug
4-pin mic. connector
If any of the previous items are missing,
contact the repair department at Ten-Tec
for replacements.
vi
Repair Department (865) 428-0364
Switchboard (865) 453-7172
FAX (865) 428-4483
ACCESSORIES
There are several Ten-Tec station
accessory items that are suitable for use
with JUPITER. Contact the Ten-Tec
sales department for pricing and
availability information.
#963 +13.8 VDC, 25 amp
power supply
#3021 Remote tuning
encoder/keypad
#306 4 pin to 2 pin power supply
cable adapter
#701 hand microphone
#705 desk microphone
#35057
#80573
4-pin microphone connector
2-pin DC connector with pins
74269 Second Printing
JUPITER Моде! 538
30 August, 2001