Ten-Tec JUPITER - Page 25

snapshot and then to clear the
display.
e Push & MULTIple action requires
selecting the function with a key
press and controlling it via the
MULTI control, as is the case with
the М>У and V>M keys.
• А momentary-action control is active
only while its key is pushed. SPOT
and REV are examples.
The AVAILABILITY field differentiates
between “continuous” and “select-with-
key” functions. Continuous controls аге
active full-time and status always
appears on the screen. Select-with-key
controls require a keystroke before they
appear on the screen. Their setting
remains effective until changed, but the
display changes when the operator
pushes another select-with-key button.
2-10
74269 Second Printing
Model 538 JUPITER
30 August, 2001