Ten-Tec JUPITER - Page 35

INTERFACE, and run the software to
perform the update. The software is free
via a connection to the Ten-Tec page on the
Internet World Wide Web.
3.18.
In Emulation mode, JUPITER operates as
though it were a Pegasus. When the
operator exits the computer program,
JUPITER operation reverts to its normal
mode, See chapter 8 for details.
Pegasus Emulation Mode
3-8
3.19, Resetting the JUPITER Processor
On rare occasions, it may be desirable to
return to factory-default memory settings or
to “rescue” TUPITER's processor from a
“glitch”. Holding down any control button
while switching on the POWER will reset
the processor and restore factory settings in
memory. This operation is familiar to
personal computer users and provides an
“escape-hatch” when things go wrong!
74269 Second Printing
Model 538 JUPITER
30 August, 2001