Need help?Do you have a question about the Ten-Tec RX-340 and is the answer not in the manual?
Lists detailed technical specifications for the receiver.
Explains the receiver's front-end and DSP design.
Explains the main tuning knob and step tuning buttons.
Covers setting bandwidth, AGC, BFO, PBT, Notch, Squelch, and Noise Blanker.
Explains storing, recalling, scanning channels, and frequency lockouts.
Explains connecting multiple receivers via RS-232 interface.
Details ASCII commands for controlling receiver functions.
Outlines identifying and replacing faulty modules or subassemblies.
Explains using Built-In Test Equipment (BITE) for diagnostics.
Lists tests for verifying receiver performance and specifications.
General| IF Rejection | >80 dB |
|---|---|
| Image Rejection | >70 dB |
| Modes | AM, SSB, CW, RTTY |
| Sensitivity | 0.5 μV for 10 dB S/N (SSB, CW) |
| Selectivity | 2.4 kHz (SSB) |
| Power Supply | 12 V DC |
| Weight | 5.5 kg |
| Tuning Steps | 1 Hz |
To Next Page
