39
c. Static IP
If your connection mode is static IP, you can modify the following
addressing information.
¾ IP Address: Here enter the WAN IP address provided by
your ISP. If you are not clear, consult you ISP please.
¾ Subnet Mask: Enter the WAN Subnet Mask here.
¾ Gateway: Enter the WAN Gateway here.
¾ Primary DNS Server: Enter the Primary DNS server
provided by your ISP.
¾ Secondary DNS Server: Enter the secondary DNS.
¾ MTU: Maximum Transmission Unit. It is the size of largest
datagram that can be sent over a network. The default value
is 1492. Do NOT modify it unless necessary. But if some
specific website or web application software can not be open
To Next Page
Loading...
