Tenda 3G150M - Appendix Ⅱ: How to Set the Network Adapter after Device; Encrypted

85
Appendix Ⅱ: How to set the network adapter after
device encrypted
When the device is encrypted, you need to enter password to
connect to the wireless device to access the internet. Set up a
wireless network adapter as follows:
1. On your computer desktop right click “My Network Places”
and select “Properties”.
2. Right click “Wireless Network Connection” and select “View
Available Wireless Network”. The entire wireless signal will be
shown in the interface. Please select “Tenda”. If you don’t find it,
please click “Refresh Network List”.