53
prevent the MAC addresses in the list from accessing the
wireless network; “Allow” to allow the MAC address in the
list to access the wireless network.
¾ MAC Address Management：Input the MAC address to
implement the filter policy. Click “Add” to finish the MAC
add operation.
¾ MAC Address list：Show the added MAC addresses. You
can add or delete them.
6.6 Connection Status
This page shows wireless client’s connection status, including
MAC address, Channel bandwidth, etc. Select “WLAN
Setting->connection status” to enter the following screen:
¾ MAC Address：Shows current MAC addresses of the hosts
connecting to the Router.
¾ Bandwidth ： Shows current frequency bandwidth the
wireless client used.
To Next Page
Loading...
