43
11g mode： Allow the 11g/11n-compliant client device to
connect with the AP at the maximum speed of 54Mbps.
11b/g mode: Allow the 11b/g-compliant client device to
connect with the AP with auto-negotiation speed, and 11n
wireless client to connect the device with 11g speed.
11b/g/n mode：Allow 11b/g/n-compliant client device to
connect with the AP with auto-negotiation speed.
¾ SSID：SSID (Service Set Identifier) is the unique name of
the wireless network. This device has two SSID and the
main SSID is necessary.
¾ Broadcast (SSID): Select “Enable” to enable the device's
SSID to be visible by wireless clients. The default is enabled.
If you disable it, the clients must know the SSID to
communicate.
¾ BSSID：Basic Service Set Identifier of wireless network. In
IEEE802.11, BSSID is the MAC address of wireless access
point.
¾ Standard Channel：Specify the effective channel (from 1
to 13\Auto) of the wireless network.
¾ Extension Channel ： To increase data throughput of
wireless network, the extension channel range is used in 11n
mode.
To Next Page
Loading...
