50
encryption method and secret keys by manual. In the “WLAN
settings” menu, click “WPS settings” to enter the next screen.
¾ WPS settings：To enable or disable WPS function. The
default is “disable”.
¾ WPS mode ： Provide two ways: PBC (Push-Button
Configuration) and PIN code.
¾ PBC：Select the PBC or press the WPS button on the back
panel of the device for about one second (Press the button
for about one second and WPS indicator will be blinking for
2 minutes, which means the WPS is enabled. During the
blinking time, you can enable another device to implement
the WPS/PBC negotiation between them. Two minutes later,
To Next Page
Loading...
