Tenda AC8

3
1.2.2 AC7 & AC11
The Ethernet ports of AC7 are fast Ethernet ports, and those of AC11 are gigabit ports. Both
products are similar in appearance. AC7 is used for illustration here.
LED indicator
LED indicator
Status
Description
SYS
System LED
indicator
Solid on
⚫
The router is starting.
⚫
If the indicator still lights solid on during normal use, the
system is faulty.
Blinking
The system is working properly.
Off
The system is faulty, or the router is not powered on properly.
WiFi
WiFi & WPS LED
indicator
Solid on
At least one of the 2.4 GHz and 5 GHz WiFi networks is enabled.
Fast blinking
Data is being transmitted wirelessly.
Slow blinking
The router is performing WPS negotiation.
Off
The WiFi network of the router is disabled.
WAN
WAN port LED
indicator
Solid on
The WAN port is connected properly, but no data is being
transmitted over the WAN port.
Blinking
The WAN port is connected properly, and data is being
transmitted over the WAN port.
Off
The WAN port is disconnected or improperly connected.
LAN
LAN port LED
indicator
Solid on
At least one LAN port is connected properly.
Blinking
A new wired device is connected to a LAN port properly.
Off
No device is connected to any LAN port of the router properly.