Back Panel 
 
  ON/OFF: Power switch to turn the router on or off. 
_________________________________________________________________________________________________ 
Note: 
Please use the included power adapter. Use of a power adapter with different voltage rating may damage the device. 
_________________________________________________________________________________________________ 
 
  WPS/RESET:  Press  it  for  1-3  seconds  to  enable  WPS  connection  or  7  seconds  to  restore  all  configurations  to 
factory defaults. 
  LAN:    Ethernet  RJ-45  LAN  ports  to  cable  the  device  to  the  local  network  devices  such  as  computers.LAN: 
Ethernet RJ-45 LAN ports to cable the device to the local network devices such as computers. 
  DSL: RJ-11 Asynchronous DSL (ADSL) port for connecting the device to a DSL line. 
Follow the diagram below to install the device.