Tunnel Name: Specify the name of the tunnel.
Mechanism: Currently, only 6rd configuration is supported.
Associated WAN Interface: Specify the WAN iterface of the tunnel.
Associated LAN Interface: Specify the LAN iterface of the tunnel.
Manual: If you select Manual, enter the AFTR information also:
Automatic: If Automatic is selected, no configurations are required.
Apply/Save: Click to apply and save your settings.
4.1.16 Certificate
This section explains the following information:
• Local Certificates
• Trusted CA (Certificate Authority) Certificates
Local Certificates
Here you can Add, View or Remove certificates. Local certificates are used by peers to verify your identity. Maximum 4
certificates can be stored.
To generate generate a certificate signing request:
1. Click the Create Certificate Request button to enter the page below.
To Next Page
Loading...
