EasyManua.ls Logo

Tenda MF6 - Page 44

Tenda MF6
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Document Version: V1.0
38
Parameter description
Parameter
Description
IP Address
Specifies the LAN IP address of the mobile Wi-Fi, which is also the management IP
address for logging in to the web UI of the mobile Wi-Fi.
Subnet Mask
Specifies the subnet mask of the mobile Wi-Fi, which is used to identify the IP address
range of the local area network.
DHCP Server
Specifies whether to enable the DHCP server function. Once enabled, the DHCP server
automatically assigns internet parameters such as IP address, subnet mask and
gateway address to the client. This function is recommended to be enabled.
Start IP
Specify the range of IP addresses that can be assigned to devices connected to the
mobile Wi-Fi. The default range is 192.168.0.2 to 192.168.0.254.
It is available only when DHCP Server is enabled.
End IP
Lease Time
Specifies the valid duration of the IP address that is assigned to a client. After an IP
address expires, the mobile Wi-Fi can assign it to any client.
The default value is recommended.
It is available only when DHCP Server is enabled.
Manual DNS
Specifies whether to allocate another DNS address to the client. When it is disabled,
the LAN IP address of the mobile Wi-Fi is used as the DNS address of the client. When
it is enabled, Primary DNS must be set and Secondary DNS is optional.
It is available only when DHCP Server is enabled.
Primary DNS
Specifies the primary DNS address of the mobile Wi-Fi, which is assigned to the clients.
You can change it if necessary. Ensure that the primary DNS server is the IP address of
the correct DNS server or DNS proxy. Otherwise, you may fail to access the internet.
It is available only when Manual DNS is enabled.
Secondary DNS
Specifies the secondary DNS address of the mobile Wi-Fi used to assign to the clients.
It is an optional field and is left blank by default.
It is available only when Manual DNS is enabled.

Related product manuals