39
Step 2 Log in to TDSEE App to check whether the Micro SD card can be identified normally.
Log in to TDSEE App. Tap the camera on the home page. If a window pops up that Micro SD Card Error. It indicates that the current format of the Micro SD
card does not meet the requirements. Please format it according to the instructions.
If the formatting of the Micro SD card fails, please try the following solutions:
- Cut off the power of the camera, unplug and insert the Micro SD card, then power on the camera again.
- You can find a professional to test or use MyDiskTest software to check whether the Micro SD card is normal.
Step 3 Set the recording mode of Micro SD card. Please refer to Micro SD card recording settings for detailed steps.
----End
To Next Page
Loading...