VLAN Management
- 48 -
Delete 802.1Q VLAN
Suppose to delete the port 3 in the above-mentioned Add 802.1Q VLAN from VLAN2.
Configuration Steps:
1. Log in the Web administration and go to VLAN Management > 802.1Q VLAN page;
2. Select: Check the before Port No. and select the port to be set;
3. VLAN List: In the following input box, enter the VLAN ID to be deleted;
Tip
VLAN 1 is the default VLAN ID and must be reserved.
4. Click -Del to end the setup. The outcome is shown in the page below.
To Next Page
Loading...
