Switch * 1
Power adapter * 1
Quick installation guide * 1
If any item is missing, damaged or incorrect, please keep the original packaging and contact the local reseller or
distributor immediately.
1. Installing the switch
Select one mounting method as required.
Option A. Desktop mounting
Put the switch on a stable and flat desktop.
Option B. Wall mounting
Step 1: Drill two holes in the wall in a horizontal distance of 116 mm. Knock sleeve anchors (self-preparation) into the
holes using a rubber hammer till the sleeve anchor is level with the wall. Then tighten two screws (self-preparation)
into the sleeve anchors using a screwdriver, and keep the screw heads outside the wall at least 2.7 mm, to ensure
that the switch can be hung on the screws firmly.
Step 2: Align the slots of the switch to the screw heads, and slip the switch to make it fixed on the screws firmly.
Note: For safety, do not face the air vents of the switch down
2. Connecting your devices
To Next Page
Loading...
