EasyManua.ls Logo

Tenda TEG1224T - Page 14

Tenda TEG1224T
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TEG1216T/1224T Giga Web Smart Switch
System Information: Display current switch system situation.
¾ Hardware Version :Display the switch hardware version.
¾ Software Version :Display the switch Software version.
¾ DHCP Client:Display DHCP Client status,default is disabled.
¾ VLAN Mode:Display the current switch VLAN mode.
¾
IP address :192.168.0.1(default
¾ Subnet Mask: 255.255.255.0(default)
¾ Gateway :0.0.0.0(default)
¾ MAC address:Display the current switch MAC address.
¾ Address Aging time:Display the current switch MAC Address
Aging time,(default is 300 seconds)
3.3 Port Management
Port Management can set each port as: auto-negotiation, speed,
duplex, flow control. Every port can choose one work mode in 6
kinds as below: 10M half-duplex, 10M full-duplex, 100M
half-duplex,100M full-duplex, 1G full-duplex, auto-negotiation.
Default is auto-negotiation; each port must choose a best work
mode after it negotiated with the corresponding object automatically.
14

Other manuals for Tenda TEG1224T

Related product manuals