TEG1216T/1224T Giga Web Smart Switch
relative literature if know more about this)
IEEE 802.1Q VLAN：Display IEEE 802.1Q VLAN group current setting
situation, as below:
3.6 Trunk Setting
¾ Trunk also called port aggregate，Major used for the Uplink
passage redundancy, mistake container ; Support 2 kinds
optional Trunk arithmetic, system can count automatically
corroding to the chosen arithmetic and decide which ports of the
Trunk Group transferring the data.
¾ Every Trunk group can choose 2 or 4 ports, the port chosen as
Trunk group member can not used as other utilities, even though
matter the port is using as Trunk member.
¾ Trunk group can not span the VLAN, all the trunk members must
be in the same VLAN, otherwise Trunk function will lose.
¾ The port of the Uplink switch must also set as the same Trunk of
the other switch when it used as Uplink. Namely by Trunk Group
24
To Next Page
Loading...
