TEG1216T/1224T Giga Web Smart Switch
to Trunk Group mode to come true the Multi port Uplink.
¾ Cannot connect the two Trunk group into each other, can not
connect two switches by two Trunk passage. Any operation of
them will make the network cycle and stop the network.
¾ Can set 4 Trunk groups farthest in one switch, every Trunk set 4
member ports farthest.
Trunk group setting:
¾ Trunk arithmetic option: can choose Original address arithmetic or
Target address arithmetic.
¾ Trunk group 1: choose Trunk group member 1
¾ Trunk group 2: choose Trunk group member 2
¾ Trunk group 3: choose Trunk group member 3
¾ Trunk group 4: choose Trunk group member 4
Notice:
1. Trunk group members must be the continuous 2~4 port.
2. Two Trunk group must be the lower port to higher port
corresponding connect.
3.7 QoS Control
25
To Next Page
Loading...
