TEG1216T/1224T Giga Web Smart Switch
2.2 Switch backplane specification:
Backplane including 1 AC power supply input receptacle, list as below:
TEG1216T/1224T internal power is AC170-260V, 50-60HZ.
Back plane Diagram
2.3 Environment Demand Specifications
¾ Have Ethernet LAN; use the TEG1216T/1224T Access into the
network.
¾ Support TCP/IP protocol, need Microsoft IE 4.0 or Netscape
Navigator4.0 or above version browser computer to
TEG1216T/1224T.
¾ AC170-260V 50-60 HZ Power suppliers.
¾ Work Environment temperature ：0-45
° C , try best to put the
switch far away from the hot device ,make sure there’s at least
10cm to diffuse heat.
¾ Environment humidity：5%-95% no coagulum, don’t put switch into
dirty or watery place.
¾ Don’t put the switch in the powerful electrical field, magnetic field,
don’t the quake, dust, powerful ray irradiate directory.
2.4 Hardware Installation
Plane installation：
Put the 4 pieces rubber mat into flute of the bottom of the
switch, then put the switch into a platform.
9
To Next Page
Loading...
