300Mbps Wireless Access Point
² Fragment Threshold The fragmentation threshold defines the
maximum transmission packet size in bytes. The packet will be
fragmented if the arrival is bigger than the threshold setting. The
default size is 2346 bytes.
² RTS Threshold RTS stands for “Request to send”. This parameter
controls what size data packet the frequency protocol issues to RTS
packet. If the device works in SOHO, do not modify the default
value.
² TX Power Set the wireless output power level. The default value is
100.
² WMM Capable To enhance wireless multimedia transfer
performance (0n-line video and voice). If you are not clear about this,
enable it.
² APSD Capable It is used for auto power-saved service. The
default is disabled.
To Next Page
Loading...
Need help?
General
