Need help?Do you have a question about the Tenda O6 and is the answer not in the manual?
General| Internal | No |
|---|---|
| Placement | Wall |
| Reset button | Yes |
| Certification | FCC/CE/RoHS |
| Product color | White |
| LED indicators | Status |
| International Protection (IP) code | IP67 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -20 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Channel bandwidth | 35 MHz |
| Transmitting power | 1 dBmW |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 433 Mbit/s |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Input current | 0.5 A |
| AC input voltage | 24 V |
| Power consumption (max) | 9 W |
| Antenna features | Integrated antenna |
| Antennas quantity | 1 |
| Antenna gain level (max) | 16 dBi |
| USB 2.0 ports quantity | 0 |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 67.5 mm |
|---|---|
| Width | 94.9 mm |
| Height | 270 mm |
Details the device's capabilities including wireless speed, antenna, LAN port, and encryption.
Lists all items included in the product packaging, such as the CPE, power adapter, and cables.
Explains the front and rear panels, ports, buttons, and LEDs of the device.
Covers environment requirements and initial device checks before installation.
Details the process of mounting the device and connecting cables to the AP.
Illustrates how to connect the device to a network via the power adapter and cables.
Steps to access the device's web interface using default credentials and IP address.
Describes the three main areas of the web interface: navigation bars and configuration area.
Displays system, wireless, and statistics information about the device's current operation.
Guides users through setting up the device in different operation modes like AP, Station, WISP, etc.
Explains the functionality and application scenarios for each operating mode (AP, Client, Repeater, WISP, Router).
Covers LAN settings, DHCP server, DHCP client, and VLAN settings for network management.
Configuration options for basic, advanced, and access control for wireless parameters.
Includes LAN rate, diagnose tools (ping, traceroute), and network services for troubleshooting.
Advanced router functions like MAC Clone, Traffic Control, Port Forwarding, DMZ, MAC Filter, DDNS, and Remote Web Access.
Step-by-step guide for setting up network adapter properties on a Windows 7 computer.
Covers CE mark warnings, FCC statement, and regulatory compliance for radio interference.
To Next Page
