EasyManuals Logo

Tenda O6 User Manual

Tenda O6
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Web UI Functions
-39-
Step 3: Set up VLAN parameters of AP2.
This step is similar to that of AP1. One difference is that enter 20 in WLAN Interface field.
Step 4: Set up VLAN parameters of the switch (Here we take Tenda TEG1224T as an example.)
Switch Port
Allowed VLAN ID
Port Type
PVID
Port 1 (Connect to Gateway)
1, 10, 20
Trunk port
1
Port 3 (Connect to AP1)
1,10
Trunk port
1
Port 6 (Connect to AP2)
1,20
Trunk port
1
Step 5: Set up VLAN parameters of the gateway
The port connecting to the switch should allow VLAN 10 and VLAN 20 to get through.
4.4 Wireless
Wireless settings contain the following:
Basic: On this page, you can set up basic wireless parameters of this device, such as SSID, broadcast SSID,
encryption type, etc.
Advanced: On this page, you can set up advanced wireless parameters of this device. You can keep the default
value if you’re not familiar with these parameters.
Access Control: On this page, you can set up rules to forbid or permit specified wireless clients to access this
device. The rules are based on MAC address.
4.4.1 Basic
On this page, you can set up basic wireless parameters of this device, such as SSID, broadcast SSID, encryption type,
etc.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda O6 and is the answer not in the manual?

Tenda O6 Specifications

General IconGeneral
InternalNo
PlacementWall
Reset buttonYes
CertificationFCC/CE/RoHS
Product colorWhite
LED indicatorsStatus
International Protection (IP) codeIP67
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-20 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Channel bandwidth35 MHz
Transmitting power1 dBmW
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate433 Mbit/s
Security algorithms64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Input current0.5 A
AC input voltage24 V
Power consumption (max)9 W
Antenna featuresIntegrated antenna
Antennas quantity1
Antenna gain level (max)16 dBi
USB 2.0 ports quantity0
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth67.5 mm
Width94.9 mm
Height270 mm

Related product manuals