Need help?Do you have a question about the Tenda i9 and is the answer not in the manual?
General| 5 GHz | No |
|---|---|
| 2.4 GHz | Yes |
| Bandwidth | 24 GHz |
| Channel bandwidth | 533 MHz |
| Transmitting power | 20 dBmW |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 300 Mbit/s |
| Internal | - |
| Placement | Ceiling, Wall |
| Certification | FCC/CE/RoHS |
| Product color | White |
| LED indicators | System |
| Output current | 1 A |
| Output voltage | 12 V |
| Power consumption (max) | 8 W |
| Security algorithms | WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Number of SSID supported | 4 |
| Storage temperature (T-T) | -30 - 70 °C |
| Operating temperature (T-T) | -10 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Antennas quantity | 2 |
| Antenna gain level (max) | 2 dBi |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 184 mm |
|---|---|
| Height | 38 mm |
Lists and defines common acronyms and abbreviations used in the document.
Provides an overview of the Tenda i9 wireless access point, its features, and capabilities.
Describes the physical appearance of the Tenda i9 wireless access point, including indicators and ports.
Details the status and meaning of the LED indicator on the Tenda i9 access point.
Explains the function and connection details of the buttons and ports on the Tenda i9 access point.
Describes the information contained on the label located on the rear panel of the access point.
Details how to deploy a small-scale WiFi network using Tenda APs and related equipment.
Guides the setup of APs with a Tenda router that has AP controller capabilities.
Explains how to deploy APs with a router that lacks AP controller capabilities.
Describes the setup for deploying a large-scale WiFi network using Tenda AP controllers.
Provides step-by-step instructions to access and log in to the AP's web user interface.
Explains the process of logging out of the AP's web user interface and its implications.
Details the different sections and components of the AP's web user interface.
Describes the common buttons found within the AP's web user interface and their functions.
Introduces the quick setup module for configuring the AP to provide wireless network access.
Guides through the configuration steps for setting the AP to operate in AP mode.
Details the procedure for configuring the AP to operate in Client+AP mode.
Explains how to view the system and LAN status information of the AP.
Describes how to check the radio status and SSID status of the wireless network.
Details how to view traffic statistics for each SSID of the AP.
Explains how to view information about wireless clients connected to the AP.
Covers viewing and configuring MAC address, device name, and IP settings for the AP's LAN port.
Details the procedure for setting a static IP address for the AP.
Explains how to configure the AP to obtain an IP address dynamically from a DHCP server.
Describes how to configure the AP to function as a DHCP server.
Provides an overview of the DHCP server function and its default state.
Guides the steps to enable and configure the DHCP server settings on the AP.
Explains how to view the list of DHCP clients connected to the AP.
Covers setting SSID-related parameters for the AP's wireless networks.
Introduces basic wireless settings like Broadcast SSID, Isolate Client, and WMF.
Details the procedure for modifying basic SSID configurations such as name and security.
Provides examples for setting up non-encrypted and WPA/WPA2-PSK encrypted wireless networks.
Describes how to set radio parameters for the AP, including SSID isolation.
Introduces the RF module and the SSID isolation function.
Guides on modifying RF parameters like Enable RF, Channel, and Channel Bandwidth.
Explains how to scan for nearby wireless networks and check channel usage.
Provides an overview of the channel scan function.
Details the steps to perform a channel scan and view the results.
Covers the Wireless Multimedia (WMM) settings for optimizing wireless performance.
Introduces WMM, its terms, and EDCA parameters for QoS.
Guides on how to enable WMM and select optimization modes.
Covers advanced RF performance optimization settings.
Provides an overview of advanced RF performance settings.
Details how to modify advanced settings like Beacon Interval and Fragment Threshold.
Explains how to configure MAC address filtering for wireless access control.
Introduces the MAC address filter rules supported by the AP.
Guides on setting up MAC address filtering rules for SSIDs.
Provides an example of configuring access control to allow specific devices.
Covers configuring 802.1Q VLANs for the AP.
Introduces the QVLAN function and its applicability.
Details the steps to enable and configure QVLAN settings.
Provides an example of configuring QVLAN settings for a hotel scenario.
Introduces SNMP and its role in network management.
Explains the SNMP manager, agent, and MIB components.
Describes basic SNMP operations like Get and Set.
Discusses SNMP protocol versions V1 and V2C.
Introduces the concept of Management Information Base (MIB) and OIDs.
Guides on enabling and configuring SNMP agent settings on the AP.
Provides an example of configuring SNMP for monitoring and management.
Details the procedure for upgrading the AP's firmware for enhanced functionality and stability.
Covers setting the AP's system time and login timeout interval.
Explains how to set and synchronize the AP's system time.
Describes how to set the login timeout interval for the AP's web UI.
Covers viewing and managing AP logs for troubleshooting and monitoring.
Details how to view the logs of events and operations on the AP.
Explains how to configure the number of logs displayed and set up log servers.
Provides functions for backing up, restoring, and resetting AP configurations.
Guides on backing up and restoring the AP's current configuration.
Details methods for restoring the AP to its factory default settings.
Covers changing user names and passwords for AP login accounts.
Explains how to use the diagnostics tool to locate network faults.
Covers manual and automatic rebooting of the AP.
Details how to manually reboot the AP.
Explains how to configure the AP for automatic reboots at intervals or specific times.
Describes how to turn on/off the LED indicators of the AP.
Provides answers to frequently asked questions about AP access and connectivity.
Guides on how to set the IP address of a computer for accessing the AP.
Lists the default factory settings for various parameters of the AP.
To Next Page
