Tenda i9 User Manual

16
5 Status
5.1 System Status
To view the system status and LAN status of the AP, choose Status > System Status.
Parameter description
Parameter
Description
AP Name
It specifies the name of the AP.
A unique Device Name helps quickly identify the AP. You can change the Device
Name on the Network > LAN Setup page.
System Time
It specifies the current system time of the AP.
Uptime
It specifies the time that has elapsed since the AP was started last time.
Number of Clients
It specifies the number of wireless clients currently connected to the AP.
Firmware Version
It specifies the firmware version number of the AP.

Tenda i9 Specifications

General

5 GHz	No
2.4 GHz	Yes
Bandwidth	24 GHz
Channel bandwidth	533 MHz
Transmitting power	20 dBmW
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	-
Placement	Ceiling, Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	System
Output current	1 A
Output voltage	12 V
Power consumption (max)	8 W
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported	4
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antennas quantity	2
Antenna gain level (max)	2 dBi
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	184 mm
Height	38 mm