78
9.2 Time & Day
This module enables you to set the system time and login timeout interval of the AP.
9.2.1 System Time
Ensure that the system time of the AP is correct, so that logs can be recorded correctly and the
reboot schedule can be executed correctly.
To access the page, choose Tools > Date & Time.
The AP allows you to set the system time by synchronizing the time with the internet or manually
setting the time. By default, it is configured to synchronize the system time with the internet.
Synchronizing with internet time servers
The AP automatically synchronizes its system time with a time server of the internet. This enables
the AP to automatically correct its system time after being connected to the internet.
For details about how to connect the AP to the internet, refer to LAN Setup.
Procedure for configuring the AP to synchronize its system time with the internet:
Step 1 Choose Tools > Date & Time > System Time.
Step 2 Select the Synchronize with internet time check box.
Step 3 Set Sync Interval to the interval at which the AP synchronizes its system time with a time
server of the internet. The default value 30 minutes is recommended.
Step 4 Set Time Zone to your time zone.
Step 5 Click Save.