Tenda i9 - Example of configuring QVLAN settings

62
Parameter
Description
EDCA Parameters
For details, refer to section 7.5.1 Overview.
7.5 Advanced
7.5.1 Overview
This module is used to set the RF performance optimization parameters of the AP.
7.5.2 Changing the advanced settings
It is recommended that you change the settings only under the instruction of professional personnel,
so as to prevent decreasing the wireless performance of the AP.
Step 1 Choose Wireless > Advanced.
Step 2 Change the parameters as required.
Step 3 Click Save.
--End
Parameter description
Parameter
Description
Beacon Interval
It specifies the interval for transmitting the Beacon frame.
The Beacon frame is transmitted at the specified interval to announce the
presence of a wireless network. Generally, a smaller interval enables wireless
clients to connect to the AP more quickly, while a larger interval ensures higher
data transmission efficiency.