Tenda i9 User Manual

87
9.5 Account
To access page for changing user names and passwords, choose Tools > Account.
On this page, you can change the login account information of the AP to prevent unauthorized
login.
Parameter description
Parameter
Description
Account Type

Administrator: An account of this type enables you to view and modify settings
of the AP.

User: An account of this type enables you to view settings of the AP.
User Name
It specifies the user name of an account.
By default, the AP has one administrator account and one user account. Both the
user name and password of the administrator account are admin. Both the user
name and password of the user account are user.
Enable
It specifies whether an account is enabled.

The administrator account is always enabled.

The user account is enabled by default and can be disabled.
Operation
Change: This button is used to change the user name and password of the
account corresponding to the button.
Delete: This button is used to delete the user account.
After changing or deleting an account, click Save.

Tenda i9 Specifications

General

5 GHz	No
2.4 GHz	Yes
Bandwidth	24 GHz
Channel bandwidth	533 MHz
Transmitting power	20 dBmW
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	-
Placement	Ceiling, Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	System
Output current	1 A
Output voltage	12 V
Power consumption (max)	8 W
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported	4
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antennas quantity	2
Antenna gain level (max)	2 dBi
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	184 mm
Height	38 mm