86
When the factory settings are restored, your configuration is lost. Therefore, you need to
reconfigure the AP to connect to the internet. Restore the factory settings of the AP only when
necessary.
To prevent AP damages, ensure that the power supply of the AP is normal when the AP is reset.
Restoring the Factory Settings Using Software
Step 1 Choose Tools > Configuration and click the Restore to Factory Default tab.
Step 2 Click the Restore to Factory Default button.
--End
Restoring the factory settings using hardware
This method enables you to restore the factory settings without logging in to the web UI of the AP.
Configuration procedure:
Step 1 When the AP is working properly, hold down the reset button for 8 seconds.
Step 2 Wait about 1 minute.
--End
To Next Page
Loading...
