Tenda i9 User Manual

85
9.4 Configuration
9.4.1 Backup & Restore
The backup function enables you to back up the current configuration of the AP to a local
computer. The restoration function enables you to restore the AP to a previous configuration.
If the AP enters the optimum condition after you greatly change the configuration of the AP, you
are recommended to back up the new configuration, so that you can restore it after upgrading or
resetting the AP.
If you need to apply same or similar configurations to many APs, you can configure one of the APs,
back up the configuration of the AP, and use the backup to restore the configuration on the other APs.
This improves configuration efficiency.
Backing Up the Current Configuration
Step 1 Choose Tools > Configuration > Backup & Restore.
Step 2 Click Backup and follow the on-screen instructions to perform operations.
--End
Restoring a Configuration
Step 1 Choose Tools > Configuration > Backup & Restore.
Step 2 Click Choose File and select the file of the configuration to be restored.
Step 3 Click Restore and follow the on-screen instructions to perform operations.
--End
9.4.2 Restoring the Factory Settings
If you cannot locate a fault of the AP or forget the password of the web UI of the AP, you can reset
the AP to restore its factory settings and then configure it again. The AP can be reset using
software or hardware.
After the factory settings are restored, the login IP address of the AP is changed to 192.168.0.254,
and the user name and password of the AP are changed to admin.

Tenda i9 Specifications

General

5 GHz	No
2.4 GHz	Yes
Bandwidth	24 GHz
Channel bandwidth	533 MHz
Transmitting power	20 dBmW
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	-
Placement	Ceiling, Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	System
Output current	1 A
Output voltage	12 V
Power consumption (max)	8 W
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported	4
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antennas quantity	2
Antenna gain level (max)	2 dBi
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	184 mm
Height	38 mm