Tenda i9 - Wireless Settings; Basic settings; Overview

21
6 Network settings
6.1 LAN setup
To view or configure the MAC address, device name, IP address obtaining mode, and other related
information of the LAN port of the AP, choose Network > LAN Setup.
Parameter description
Parameter
Description
MAC Address
It specifies the MAC address of the LAN port of the AP.
The default primary SSID of the AP is Tenda_XXXXXX, where XXXXXX indicates the last
6 characters of this MAC address.
IP Address Type
It specifies the IP address obtaining mode of the AP. The default option is Static IP.

Static: It indicates that the IP address, subnet mask, gateway, and DNS server
information of the AP is set manually.

Dynamic: It indicates that the IP address, subnet mask, gateway, and DNS server
information of the AP is obtained from a DHCP server in your LAN.
If IP Address Type is set to Dynamic, you can log in to the web UI of the AP only with
the IP address assigned to the AP by the DHCP server. The IP address is specified on
the client list of the DHCP server.
IP Address
It specifies the IP address of the AP if IP Address Type is set to Static. The default IP
address is 192.168.0.254 and you can change it as required.