66
Parameter description
It specifies the SSID that requires wireless client access control.
It specifies the mode for filtering MAC addresses.
Disable: It indicates that access control is disabled.
Allow: It indicates that only the wireless clients on the access control list can connect
to the AP with the selected SSID.
Disallow: It indicates that only the wireless clients on the access control list cannot
connect to the AP with the selected SSID.
7.6.3 Example of configuring access control
Networking requirement
A wireless network whose SSID is Home has been set up in a large apartment. Only family
members are allowed to connect to the wireless network.
The Access Control function of the AP is recommended. The family members have three wireless
devices whose MAC addresses are C8:3A:35:00:00:01, C8:3A:35:00:00:02, and C8:3A:35:00:00:03.
Configuration procedure:
Step 1 Choose Wireless > Access Control.
Step 2 Select Home from the SSID drop-down list box.
Step 3 Select Allow from the MAC Filter Mode drop-down list box.
Step 4 Enter C8:3A:35:00:00:01 in the MAC Address text box and click Add. Repeat this step to
add C8:3A:35:00:00:02 and C8:3A:35:00:00:03 as well.
Step 5 Click Save.
--End
To Next Page
Loading...
