Tenda i9 - Page 24

17
Parameter
Description
Hardware Version
It specifies the hardware version number of the AP.
MAC Address
It specifies the physical address of the LAN port of the AP. If you connect the AP to
other devices using Ethernet cables, the AP uses this MAC address to communicate
with those devices.
IP Address
It specifies the IP address of the AP.
The web UI of the AP is accessible at this IP address. You can change the IP address
on the Network > LAN Setup page.
Subnet Mask
It specifies the subnet mask of the IP address of the AP.
Primary DNS Server
It specifies the primary DNS server of the AP.
Secondary DNS Server
It specifies the secondary DNS server of the AP.