Tenda i9 - Time & Day; System Time

71

Configure the switch
Create IEEE 802.1Q VLANs described in the following table on the switch.
Port Connected To
Accessible VLAN ID
Port Type
PVID
AP
1, 2, 3, 4
Trunk
1
LAN server
3, 4
Trunk
1
Router
2, 4
Trunk
1
Retain the default settings of other ports. For details, refer to the user guide for the switch.

Configure the router and the internal server
To ensure that wireless devices connected to the AP can access the internet, the router and
internal server are required to support the QVLAN function. Refer to the following details:
For the router:
Port Connected To
Accessible VLAN ID
Port Type
PVID
Switch
2, 4
Trunk
1
For the internal server:
Port Connected To
Accessible VLAN ID
Port Type
PVID
Switch
3, 4
Trunk
1
For details of configuration procedure, refer to the user guide of the router and the internal server.
--End
Verification
Wireless clients connected to the internet wireless network can access only the internet, the
wireless clients connected to the oa wireless network can access only the internal server, and
wireless clients connected to VIP wireless network can both access the internet and the internal
server.