300Mbps Wireless Access Point
Upgrade Steps
1. Download the higher firmware version from our website:
www.tenda.cn.
2. Extract the firmware file on your computer.
3. On the Firmware Upgrade screen, enter the location directory of the
firmware file in the field provided, or click the Browse button and find
the file.
4. Click Upgrade button, and follow the on-screen instructions.
5. After the upgrade is completed, the device will reboot automatically.
IMPORTANT: Do not power off the system during the firmware
upgrade to avoid damaging the device.
6.7 Syslog
The section is to view the system log. Click the “Refresh” to update the
log. Click “Clear” to clear all shown information. If the log is over 150
To Next Page
Loading...
Need help?
General
