Tenda W301A User Manual

300Mbps Wireless Access Point
Select the encryption mode you need to use. (For example: set the
encryption mode as TKIP and enter the encryption key as 12345678.)
Click “Next” and save the settings. Then enter the AP2 settings.
Select “WDS” mode for AP2 and set SSID as “AP2”. Select the channel
“13” which is the same as AP1. Enter the BSSID 00:b0:c6:05:4e:d0 of
AP1 into the AP MAC blank and record the BSSID 00:b0:c6:05:4e:dd of
AP2. (You can also use “Enable scan to add”.)

Tenda W301A Specifications

General

Brand	Tenda
Model	W301A
Category	Wireless Access Point
Language	English