Tenda W316R User Manual

11N Wireless Broadband Router User Guide
87
the R outer’s LA N IP addres s 192. 168.0.1 (op en
“Command Prompt ” and type “Pi ng 19 2.168.0.1” a nd
then enter). If it is OK, please make sure your browser
does not access the Internet by proxy server. If the ping
fails, you can press the “RESET” button for 7 seconds to
restore to defaul t setti ngs. And then repeat th e pi ng
operation. If it still does not work, please contact us.
2. Forgot the login password and cannot enter the
Web-based Utility. What can I do?
Press the “RESET” button for 7 seconds to restore t he
Router to default settings.
3. The computer connected with the Router shows
IP address conflict. What can I do?
Check if there are other DHCP servers in the LAN and if
there are then disable them. The default IP address of
the router is 192. 168.0.1 pl ease maker sure the
address is not being used by any other device. If there
are two computers wi th the same IP address, pl ease
change one of them.
4. I cannot use E-mail and access the Intern et.
What can I do?
Sometimes happens wi th ADSL connecti on a nd
Dynamic IP users. You may need to modify the default
MTU value (1492). Please open the “WAN Setting” and
modify the MTU value with the recommended value as

Tenda W316R Specifications

General

Wireless Standards	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
LAN Ports	4 x 10/100 Mbps
WAN Ports	1 x 10/100 Mbps
Wireless Speed	Up to 150 Mbps
Security	WEP, WPA, WPA2, WPA-PSK, WPA2-PSK