5.How to share my c omputer’s resource w ith
other users in Internet？
If you want Internet users to access the internal server
via the router such as: e-mail server, Web, FTP. You can
configure the “Virtual Server”.
Step 1: create your internal server, make sure the LAN
users can access these servers and know related service
port. For example, Web server’s port i s 80; F TP is 21;
SMTP is 25 and POP3 is 110.
Step 2: In the router’s web click “Virtual Server” and
select “Port Range Forwarding”.
Step 3: Input the servi ce port provi ded by the rout er
(i.e. the external port) for mappi ng the i nternal and
external network, for example, 80-80.
Step 4: input the internal Web service port, for example,
80-80.
Step 5: Input the i nternal server ’s IP address. For
example, if your W eb server ’s IP addres s i s
192.168.0.10, please input it.
Step 6: select the communication protocol used by your
i n t e r n a l h o s t : T C P, U D P, B o t h .
Step 7: click “Ok” to activate the settings.
The following table lists some well-known applications
and their respective service ports:
Server Protocol
To Next Page
Loading...
