EasyManua.ls Logo

Tenma 72-7615 - Specification

Tenma 72-7615
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
SPECIFICATION
Sampling
Sampling modes Real time Equivalence
Sampling rates
72-7615
1GS/s 50GS/s72-7620
72-7625
72-7635
2GS/s 25GS/s
72-7640
Average value
All channels reach N times of sampling
Average value and N should be chosen among 2, 4, 8,16, 32,
64, 128, 256 and 512
Input
Input coupling AC, DC, Ground
Input impedance
<100MHz Parallel 1±2%MΩ with 24pF±3pF
>100MHz Parallel 1±2%MΩ with 18pF±3pF
Probe attenuation 1 X , 10 X , 100 X , 1000 X
Maximum input voltage 400V (DC+AC peak value, input impedance 1MΩ)
Time delay between channels
(typical)
50ps
Horizontal
Waveform interpolation sin (x) /x
Storage depth
Normal 6kpts, depth 8Mpts
Normal 6kpts, depth 4Mpts
Waveform capturing rate >150000wfms/s
Scanning scope (s/div) 2ns/div~50s/div under 1-2-5 system
Sampling rate and delay time ±50ppm (any time interval >1 ms)
Time interval (rT)
measure accuracy (full
bandwidth)
Single: ±(1 sampling time interval + 50ppm x reading + 0. 6ns)
> 16 average value: ± (1 sampling time interval + 50ppm x
reading + 0. 6ns)