7
x Replace the battery as soon as the battery indicator appears. With a low battery, the
meter might produce false readings that can lead to electric shock and personal injury.
x The internal circuit of the meter shall not be altered or tampered with, as it will likely
damage the meter and possibly cause electrical shock.
x A soft cloth (slightly damp with a mild detergent and water) should be used to clean the
surface of the meter as needed. No abrasive, solvent, or dripping-wet cloth should be
used on the meter, as they can cause corrosion or damage that can lead to electrical
shock or other accident.
x Turn off the meter when it is not in use and take out the battery when not using for a long
time.
x Routinely check the battery as it may leak after being installed for a long period of time;
replace the battery and clean the compartment and contacts as soon as leaking appears.
A leaking battery will damage the meter.
x Do not use or store the meter in an inclement environment of high temperature, humidity,
explosive, inflammable and strong magnetic field. The performance of the meter will
deteriorate after dampened.
Automotive Servicing Safety Guide
Warning
Pay attention to the cautions in the automotive servicing manual when you are working
72-9280: OPERATING MANUAL
To Next Page
Loading...
